【product description】
Liquid sandpaper abrasive paste is a new type of high-efficiency abrasive product. It can effectively grind and smooth the surface defects of the workpiece, which is 8-10 times more efficient than water-grinding paper. There is little dust during construction, and it does not need to be used with water, and it can also effectively remove impurities such as grease on the surface. It has no effect on the recoating of the paint film.
【The main purpose】
For all resin surface paint film grinding. It is especially suitable for efficient production processes, and can quickly smooth out defects caused by operating errors in high-concentration paint films.
◆ Remove defects on the surface of the paint film due to dust particles, sagging, overspray and orange peel.
◆ Repair the old surface layer where the paint film has been oxidized.
【Instructions for use】
1. First clean the surface to be ground (local grinding, you can only clean the area that needs to be ground).
2. Apply the liquid sandpaper abrasive paste evenly on the surface of the workpiece to be ground (if the grinding area is too large, the workpiece should be divided into multiple parts and operated one by one according to the local area. Grinding the workpiece after rubbing it, because the liquid in the abrasive paste of the liquid sandpaper will volatilize in this way, and there will be a large dust phenomenon during grinding).
3. Use the polishing machine to match the grinding disc. The surface of the grinding disc must be clean, and no other substances can adhere to it.
4. The fastest speed of the polishing machine is recommended to be within 5th gear (speed within 1200~2500 rpm).
5. Only after the scratches are smoothed can the construction of the next local area be carried out.
6. Do the grinding of the finished parts by analogy.
【Precautions】
1. Keep out of reach of children.
2. Use it in a well-ventilated place.
3. Keep away from high temperature and open flame.
4. When this product is not in use, please tighten the cover.
