【product description】
Brightening agent is a new type of high-efficiency brightening product. At the same time, the two functions of glazing, brightening and enhancement are integrated, and one process can complete the effect that can only be achieved by the original two processes. This product does not contain strong solvents, silicon compounds, and there is no dust during construction. After use, the surface forms a protective film to protect and restore the bright and dazzling effect of the surface.
【The main purpose】
Used for polishing, brightening and glazing maintenance of all resin surface paint films. Especially suitable for high-grade paint film. It can quickly repair the defects of high-concentration paint film caused by operation errors.
◆ Quickly polish, brighten and maintain the surface.
◆ Repair the oxidized old surface layer of the paint film and restore the high gloss of the paint film.
【Instructions for use】
1. First clean the surface to be varnished (partial varnishing, you can only clean the area that needs to be polished).
2. Hand rubbing construction: evenly rub the product with a fine brush (or cotton cloth) on the surface that needs to be varnished (if the area of glazing is too large, the workpiece should be divided into multiple parts and operated one by one according to the local area, absolutely Do not rub the workpiece first and then polish it, because the liquid inside the product will evaporate, and the effect will be discounted when glazing), then wait for 1 to 2 minutes and then take a clean cotton cloth and brush it clean. .
3. Machine polishing: Use a polishing machine with a fine wool wheel (or cloth wheel), the surface of the polishing disc must be clean, and no other substances can adhere to it.
4. The fastest speed of the polishing machine is recommended to be within 5th gear (speed within 1200~2500 rpm).
5. Until the wax is completely collected, the brightness comes out, and the scratches are smoothed, the construction of the next local area can be carried out.
6. By analogy, the finished parts are polished.
【Precautions】
1. Keep out of reach of children.
2. Use in a well-ventilated place.
3. Keep away from high temperature and open flame.
4. When this product is not in use, please tighten the cover.
5. Sealed storage, ventilated and dry, avoid direct sunlight, the temperature can be kept stable for 12 months under the condition of 5-30 ℃ sealed.
