One、 Related parameters
1. Main ingredients: special synthetic wax and oil, surfactants, solvents
2. Appearance: Blue paste
3. Density: approximately 0.8g/cm
4. Effective content: approximately 90%
5. Water soluble acids or bases: None
6. Oil stain test: qualified
Two、 Application field
333 wax is suitable for composite material mold molding, separation, polishing, maintenance, etc. of unsaturated resin and epoxy resin products.
Three、 Instructions for use:
1. Clean the molds that need to be used for production first.
2. ①: New mold:
First, use 2000 # sandpaper and a cleaning agent to wipe the surface of the mold flat, and ensure that there are no residual substances on the surface of the mold. Otherwise, it will have a certain impact on the formation of the finished product. Then polish and smooth the surface of the mold, and then clean the surface of the mold with clean water after polishing. Clean up any excess residue. Allow the surface of the mold to dry thoroughly before applying 333 wax.
② Old mold:
Clean the mold with a clean towel or cotton cloth.
Apply 333 wax evenly on the surface of the mold using a sponge and rotate it for 5-10 minutes. Then, use a clean soft fiber towel (clean cotton cloth is also acceptable) to wipe off any blurry wax marks on the surface until a high gloss is achieved. The new mold must be coated with 333 wax three or more times, and after the last wipe to high gloss, it can only be used after standing for one hour. The old mold only needs to be coated with 333 wax once.
Four、Precautions:
1. Place the product in a cool place.
2. Avoid contact with open flames.
3. Avoid contact with children.
4. Please cover tightly when not in use.
5. Shelf life of 24 months
