One、 Related parameters
1. Main ingredients: special synthetic wax and oil, surfactants, solvents
2. Appearance: Translucent liquid
3. Density: Approximately 0.78g/cm
4. Effective content: about 50%
5. Water soluble acids or bases: none
6. Oil stain test: Qualified
Two、 Application Fields
688 liquid wax is suitable for composite material mold forming separation, polishing, maintenance, etc. of unsaturated resin and epoxy resin products.
Three、Instructions for use:
1. Clean the molds that need to be used for production first.
2. ①: New mold:
First, use sandpaper 2000 # with cleaning agent to wipe the surface of the mold flat, and ensure that there are no residual substances on the mold surface. Otherwise, it will have a certain impact on the formation of the finished product. Then polish and smooth the surface of the mold, and after polishing, clean the surface of the mold with clean water. Clean up any excess residue. Apply 688 liquid wax only after making the surface of the mold dry and clear.
② Old mold:
Clean the mold thoroughly with a clean towel or cotton cloth.
Apply 688 liquid wax evenly onto the surface of the mold using a sponge and a rotating method. After 5-10 minutes, use a clean soft fiber towel (clean cotton cloth is also acceptable) to wipe off the blurry wax marks on the surface until a high gloss is achieved. The new mold must be coated with 688 liquid wax three times or more, and after the last wipe to a high gloss, it can only be used after standing still for one hour. The old mold only needs to be wiped with 688 liquid wax once.
Four、 Attention:
1. Place the product in a cool and shady place.
2. Avoid contact with open flames.
3. Avoid contact with children.
4. Please close the lid tightly when not in use.
5. Shelf life of 24 months
