# 6 release wax specification 311ml, used at room temperature; 8# room temperature stripping wax, specially developed for Meguiang 8# stripping wax; 333 release wax is mainly used in sanitary ware; 8# high temperature defilm wax specification 311ml, can withstand high temperature 180℃; Huxing Glory release wax specification 311ml, can withstand high temperature 180℃, sustainable for more than 2 hours, only for export. Using carnauba wax as the main component, with a unique formula prepared, than the ordinary release wax more efficient release, non-stick mold, faster release; Generation processing stripping wax is a generation of neutral packaging, for all stripping wax, regardless of room temperature or high temperature, is OK.
Use method of release wax:
1. Clean the molds needed for production first.
2, 1) New mold: First use sandpaper 2000# sandpaper with detergent on the surface of the mold to wipe flat, and must ensure that the surface of the mold without any grease residue. Otherwise, it will have some influence on the formation of finished products. Clean the surface of the mold with clean water after grinding flat. If the water on the surface of the mold will not easily slip, it has been proved that the grease on the surface has been clean. If there is a certain effect of splashing water, it means that there is residual grease on the surface. Until the water on the surface will not easily slip, the next operation can be carried out. After cleaning the residue on the surface of the new mold, the surface must be allowed to dry before applying the release wax.
2) Old mold: Use a clean towel or clean cotton cloth to clean the mold.
The stripping wax is evenly smeated on the surface of the mold with a sponge ball in a rotating way, and 5-10 minutes later, the fuzzy wax on the surface is wiped clean with a clean soft fiber towel (clean cotton cloth can also be used) and gradually brightening.
Note: The old mold only needs to be wiped with release wax once, while the new mold must be wiped three times. After the last wipe to light, it can be used after standing still for one hour.
1. Clean the molds needed for production first.
2, 1) New mold: First use sandpaper 2000# sandpaper with detergent on the surface of the mold to wipe flat, and must ensure that the surface of the mold without any grease residue. Otherwise, it will have some influence on the formation of finished products. Clean the surface of the mold with clean water after grinding flat. If the water on the surface of the mold will not easily slip, it has been proved that the grease on the surface has been clean. If there is a certain effect of splashing water, it means that there is residual grease on the surface. Until the water on the surface will not easily slip, the next operation can be carried out. After cleaning the residue on the surface of the new mold, the surface must be allowed to dry before applying the release wax.
2) Old mold: Use a clean towel or clean cotton cloth to clean the mold.
The stripping wax is evenly smeated on the surface of the mold with a sponge ball in a rotating way, and 5-10 minutes later, the fuzzy wax on the surface is wiped clean with a clean soft fiber towel (clean cotton cloth can also be used) and gradually brightening.
Note: The old mold only needs to be wiped with release wax once, while the new mold must be wiped three times. After the last wipe to light, it can be used after standing still for one hour.
